Right-click anywhere in the card plot area to access the application’s context menu. Many commonly used actions are available through this menu.
| Menu | Option(s) | Description |
|---|---|---|
|
Select Site/Service… |
Select Site/Service… |
Access the Select Service dialog box to select a UIS Site.Service |
|
Select Facility… |
Select Facility… |
Opens a dialog box for selecting a facility in the current UIS. |
|
View |
Details Panel |
Displays the details panel. |
|
Mark Points |
Displays the mark points along the plot. |
|
|
Net Stroke |
Displays the net stroke value. |
|
|
Fluid Fill Setpoint |
Displays the fluid fill setpoint, if applicable. |
|
|
Initial Cards for Device… |
Accesses the Initial Cards dialog box to select display of previously retrieved cards, when navigating to a new device. |
|
|
Overlay Cards |
Overlays card views within the current view set. |
|
|
Clear Cards |
Clears the current view set. |
|
|
Select Card Set… |
Displays all stored card transactions, allowing you to select a set to display. |
|
|
Max Cards to Display… |
Accesses the Enter Value dialog box to select the maximum number of cards to display. Valid values are 5 - 50. |
|
|
Surface Cards Only |
Displays a card plot for surface cards only. |
|
|
Downhole Cards Only |
Displays a card plot for downhole cards only. |
|
|
Surface and Downhole |
Displays card plots for both surface and downhole cards. |
|
|
|
|
Opens a print dialog box for printing the current card and status information. |
|
Card Details… |
Card Details… |
Accesses the Dynagraph Card Details dialog box, displaying card information and position/load pairs. |
|
Save as Reference… |
Save as Reference… |
Accesses the Save as Reference Card dialog box, allowing you to save the selected card as the most recent reference card in your CygNet system. |
|
Export Card… |
Export Card… |
Displays options for exporting the card to a text or data file. |
|
Remove Card |
Remove Card |
Deletes the card. |
|
Get from Device |
Status Data |
Gets status data in the details panel. |
|
Pumpoff Config |
Gets pumpoff configuration data. |
|
|
Fluid Fill Setpoint |
Gets the fluid fill setpoint from the device. |
|
|
Current Card… |
Gets the current dynagraph card from the device. See Card Types for more information. |
|
|
Shutdown Card… |
Gets the shutdown card from the device. See Card Types for more information. |
|
|
Pumpup Card… |
Gets the pump-up card from the device. See Card Types for more information. |
|
|
Reference Card |
Gets a reference card for the device. See Card Types for more information. |
|
|
Start Card |
Gets the start card from the device. See Card Types for more information. |
|
|
Alarm Card |
Gets the alarm card from the device. See Card Types for more information. |
|
|
Failure Card |
Gets the failure card from the device. See Card Types for more information. |
|
|
Edit Data |
Pumpoff Config |
Accesses the Pump-Off Configuration dialog box to edit values and send the edits back to the RTU. |
|
Fluid Fill Setpoint |
Accesses the Fluid Fill Setpoint (%) dialog box to edit load and position values and send the edits back to the RTU. |
|
|
Refresh |
Status Data |
Refreshes the display of status data in the details panel. |
|
Pumpoff Config |
Refreshes the pumpoff configuration display. |
|
|
Fluid Fill Setpoint |
Refreshes the fluid fill setpoint display. |
|
|
Auto Refresh Status… |
Accesses the Status Point Automatic Refresh dialog box to disable/enable and set a refresh rate (in seconds) for status points |
|
|
Send to Device |
Pumpoff Config |
Sends the pumpoff configuration to the device. |
|
Fluid Fill Setpoint |
Sends the fluid fill setpoint to the device. |
|
|
Card Trace |
Start Trace |
Starts a Card Trace |
|
Setup |
Sets up a Card Trace |
|
|
|
