Balance Details Report Definitions

CygNet Measurement > FMS Explorer > Admin Menu > Managing Report Definitions > Balance Details

Balance Details Report Definitions

The following parameters apply to Balance Details reports, when creating or editing report definitions through FMS Explorer.

Note: This report does not access archived data.

See Balance Details Report Templates for information about the referenced template files.

Note: Specify the Node for this report in the report template file, not via the Report control.

Parameter	Value
Start date	Select the starting date of the time range to include in the report from the drop-down menu. Note: The configuration parameter type chosen must be the same for Start date and End date. Options are as follows. Use Session date User override If User override is selected, type the start date into the text box or click ... to Select Date. Note: The report will display data in Device time (D), although the report command parameters are configured relative to Contract time (C). See Selecting Date and Time for more information. This parameter is required. Note: This parameter will not appear if it has been specified in the report template.
End date	Select the ending date of the time range to include in the report from the drop-down menu. Note: The configuration parameter type chosen must be the same for Start date and End date. Options are as follows. Use Session date User override If User override is selected, type the end date into the text box or click ... to Select Date. Note: The report will display data in Device time (D), although the report command parameters are configured relative to Contract time (C). See Selecting Date and Time for more information. This parameter is required. Note: This parameter will not appear if it has been specified in the report template.
Unit set	Select a unit set in which to view the report data. Options appear in the drop-down menu, which is populated by the unit sets defined in the service. See Configuring Unit Set Definitions for more information. This parameter is required. Note: This parameter will not appear if it has been specified in the report template.

Parameter

Value

Start date

Select the starting date of the time range to include in the report from the drop-down menu.

Note: The configuration parameter type chosen must be the same for Start date and End date.

Options are as follows.

Use Session date
User override

If User override is selected, type the start date into the text box or click ... to Select Date.

Note: The report will display data in Device time (D), although the report command parameters are configured relative to Contract time (C).

See Selecting Date and Time for more information.

This parameter is required.

Note: This parameter will not appear if it has been specified in the report template.

End date

Select the ending date of the time range to include in the report from the drop-down menu.

Note: The configuration parameter type chosen must be the same for Start date and End date.

Options are as follows.

Use Session date
User override

If User override is selected, type the end date into the text box or click ... to Select Date.

Note: The report will display data in Device time (D), although the report command parameters are configured relative to Contract time (C).

See Selecting Date and Time for more information.

This parameter is required.

Note: This parameter will not appear if it has been specified in the report template.

Unit set

Select a unit set in which to view the report data. Options appear in the drop-down menu, which is populated by the unit sets defined in the service.

See Configuring Unit Set Definitions for more information.

This parameter is required.

Note: This parameter will not appear if it has been specified in the report template.