Missing Data Report Definitions

CygNet Measurement > FMS Explorer > Admin Menu > Managing Report Definitions > Missing Data

Missing Data Report Definitions

The following parameters apply to Missing Data reports, when creating or editing report definitions through FMS Explorer.

Note: This report does not access archived data.

See Missing Data Report Templates for information about the referenced template files.

Parameter	Value
Start date	Select the starting date of the time range to include in the report from the drop-down menu. Note: The configuration parameter type chosen must be the same for Start date and End date. Options are as follows. Use Session date User override If User override is selected, type the start date into the text box or click ... to Select Date. Note: The report will display data in Device time (D), although the report command parameters are configured relative to Contract time (C). See Selecting Date and Time for more information. This parameter is required. Note: This parameter will not appear if it has been specified in the report template.
End date	Select the ending date of the time range to include in the report from the drop-down menu. Note: The configuration parameter type chosen must be the same for Start date and End date. Options are as follows. Use Session date User override If User override is selected, type the end date into the text box or click ... to Select Date. Note: The report will display data in Device time (D), although the report command parameters are configured relative to Contract time (C). See Selecting Date and Time for more information. This parameter is required. Note: This parameter will not appear if it has been specified in the report template.
Node name	Select the Node for which to display data in the report you are building. Options are as follows. Use Reports control Node - use the Node selected in the embedded Chooser of the reports control User override - type the desired Node ID into the text box provided Use Session Node - use the Node selected as the Session Node in FMS Explorer This parameter is required.

Parameter

Value

Start date

Select the starting date of the time range to include in the report from the drop-down menu.

Note: The configuration parameter type chosen must be the same for Start date and End date.

Options are as follows.

Use Session date
User override

If User override is selected, type the start date into the text box or click ... to Select Date.

Note: The report will display data in Device time (D), although the report command parameters are configured relative to Contract time (C).

See Selecting Date and Time for more information.

This parameter is required.

Note: This parameter will not appear if it has been specified in the report template.

End date

Select the ending date of the time range to include in the report from the drop-down menu.

Note: The configuration parameter type chosen must be the same for Start date and End date.

Options are as follows.

Use Session date
User override

If User override is selected, type the end date into the text box or click ... to Select Date.

Note: The report will display data in Device time (D), although the report command parameters are configured relative to Contract time (C).

See Selecting Date and Time for more information.

This parameter is required.

Note: This parameter will not appear if it has been specified in the report template.

Node name

Select the Node for which to display data in the report you are building.

Options are as follows.

Use Reports control Node - use the Node selected in the embedded Chooser of the reports control
User override - type the desired Node ID into the text box provided
Use Session Node - use the Node selected as the Session Node in FMS Explorer

This parameter is required.