FMS Explorer Generate Smart Groups Commands

CygNet Measurement > FMS Explorer > Commands Menu > Running Generate Smart Groups Commands

Running Generate Smart Groups Commands

Run Smart Groups Commands Use the Smart Groups button to access the dialog box to run a Generate Smart Groups command. This command triggers the service to generate groups based on a set of "smart" rules and conditions. You can also run the command manually from this page.

The Smart Group definition and its component rules must be configured prior to running the Generate Smart Groups command. Use the Extended Options button on the Commands menu to access configuration details. See Configuring Extended Command Options and Configuring Smart Group Definitions for more information.

The command can also be initiated by scheduling the Generate Smart Groups command in the Master Scheduling Service (MSS) in CygNet Explorer (most common usage), or via scripting.

See FMS Commands and Generate Smart Groups for more information about this command.

See Scheduling FMS Command Tasks in the MSS for more information about scheduling commands.

See FMS ActiveX Controls and CxHmiFms for more information about using commands via FMS ActiveX controls on CygNet Studio or CygNet Vision screens.

See CxFms for more information about scripting commands.

Managing Generate Smart Groups Commands

Prior to running a Generate Smart Groups command, verify or configure the definitions and rules referenced by the command.

Click Extended Options > Smart Group Configuration on the Commands menu to view, add, edit, or delete definitions and rules for the Generate Smart Groups command. See Configuring Smart Group Definitions for more information.

Running a Generate Smart Groups Command

Most Generate Smart Groups commands will be run via scheduled tasks. See Scheduling FMS Command Tasks in the MSS for more information.

Use the following procedure to run a Generate Smart Groups command manually.

To Run a Generate Smart Groups Command

Configure or verify smart groups definitions and rules via the Extended Options button. See Configuring Smart Group Definitions for more information
On the Commands menu, click Smart Groups to access the Run FMS Command dialog box for the Generate Smart Groups command.
Define the command definition properties.

Select a processing priority from the drop-down menu in the Command definition properties box. Options include Low, Medium, High, User, and Admin.
Select a logging level from the drop-down menu in the Command definition properties box. Options include Low, Medium, and High.

Define the command parameters.
Note: The parameters for the Generate Smart Groups system command are too extensive to be described in the Command parameters box, so they are configured through the Extended Options button on the Commands menu. See Configuring Smart Group Definitions for more information.
Click Run Command.

Command Definition Properties

The following command definition properties apply to Generate Smart Groups commands.

Property	Description
Command type	For system commands, this property will be read-only and will display the selected command type. See FMS Commands for more information about command types.
Priority	Select a processing queue Priority for the command from the drop-down menu. Options from least to greatest priority are as follows. Low level Medium level High level User initiated transaction Admin initiated transaction Default value is Low level processing queue priority.
Logging	Select a Logging level for the command results from the drop-down menu. Options are as follows. Low - displays errors Medium - displays errors and warnings High - displays errors, warnings, and status Default value is Low level logging when scheduling a command in the MSS. Default value is High level logging when creating or running an ad-hoc command in FMS Explorer.

Property

Description

Command type

For system commands, this property will be read-only and will display the selected command type.

See FMS Commands for more information about command types.

Priority

Select a processing queue Priority for the command from the drop-down menu.

Options from least to greatest priority are as follows.

Low level
Medium level
High level
User initiated transaction
Admin initiated transaction

Default value is Low level processing queue priority.

Logging

Select a Logging level for the command results from the drop-down menu.

Options are as follows.

Low - displays errors
Medium - displays errors and warnings
High - displays errors, warnings, and status

Default value is Low level logging when scheduling a command in the MSS.

Default value is High level logging when creating or running an ad-hoc command in FMS Explorer.

Command Parameters

Generate Smart Groups command parameters are configured through the Commands menu via the Extended Options button, prior to running the command. See Configuring Smart Group Definitions for more information.