The "FMS Legacy Configuration Data" (GmrConfig) data group only gets data requested by the FMS.
The "FMS Legacy Configuration" data group depends on one or more support data groups for its data. Support data groups are found in the supportDg section of your sample template. Mapping between "FMS Legacy Configuration" data group elements and FMS Legacy data items is within the configItems section of gmrMaps in the device template file. Optional data groups can be used to get similar data for different meter types.
Example
The configuration for an orifice meter is found in the MeterOrif data group and the configuration for a turbine meter is found in the MeterTurb data group. For any given meter run, only one of these data groups is configured. For a turbine meter run, the MeterTurb data group is configured, but the MeterOrif data group is not, so only data from the MeterTurb data group is sent to the EFM service.
The following table describes "FMS Legacy Configuration" data group attributes. All attributes in CygNet templates are case sensitive, but the case sensitivity of attribute values is based on context.
For information about available generic attributes, see DataGroup.
| Attribute | Description | Value | Required |
|---|---|---|---|
|
dgProtocol |
Native and Internal data group types, as defined by the dgProtocol attribute, are not user-editable aside from mapping UDCs. To add a custom data group using the native protocol, set dgProtocol to "NativeRipn" and add RIPN elements as defined in Benchmark documentation. |
Internal, NativeRipn |
Yes |
The following table describes "FMS Legacy Configuration" support data groups.
| Support Data Group | Description | Required |
|---|---|---|
|
TBD |
Your "FMS Legacy Configuration" data group requires at least one support data group. Support data groups are user configurable for this EIE. Exactly what support data group(s) you choose depends on your unique setup and needs. Although you can choose which data groups will serve as support data groups for "FMS Legacy Configuration," the data group protocol (dgProtocol) must be "Point", "PointTbl", or "Modbus". |
Yes |
The following table describes "FMS Legacy Configuration" support data group (supportDg) attributes. All attributes in CygNet templates are case sensitive, but the case sensitivity of attribute values is based on context.
| Attribute | Description | Value | Required |
|---|---|---|---|
|
N/A |
At this time, there are no attributes unique to the supportDg section. |
N/A | N/A |
|
|
|
