Note: Do not confuse operator identification codes ("opcodes") with either the "Configurable Opcode Settings" or "Configurable Opcode Data" data group. Operator identification codes are special codes used by Fisher messages to define the action they perform and/or the structure of the message of which they are part.
Native CygNet data groups for Emerson ROC EIEs are predefined to use appropriate messages, opcodes, and TLPs to interact with a field device. Most of the time, the exact combination of these items is irrelevant to the proper use of a data group because of the predefined nature of the messages.
However, it is possible to create your own unique data group, using whatever allowed opcode and TLP combination you require, by adding and configuring a "Generic TLP Data" data group. In effect, you can use a "Generic TLP Data" data group to access and organize any TLP data from any supported Emerson ROC field device. For more information, see Generic TLP Data Group.
For more specific information about opcodes and point types, see the appropriate manufacturer-provided documentation.
The following table lists opcode descriptions paired with their corresponding opcode numbers for all CygNet-supported Emerson ROC models.
Note: This list is not complete. Because of the numerous combinations of data groups, opcodes, and TLPs possible, and the fact that most Emerson ROC EIE data groups are hard-coded already, this list is only an overview of common opcodes supported by CygNet.
| Opcode Description | Opcode Numbers | ||||
|---|---|---|---|---|---|
| 100 | 107 | 300 | 400 | 500 | |
|
Acknowledge RBX |
225 |
225 |
225 |
225 |
225 |
|
Alarm Logs |
121 |
121 |
121 |
121 |
121 |
|
Archive Data for Day/Month |
128 |
128 |
128 |
128 |
128 |
|
Basic Poll |
0 |
0 |
0 |
0 |
0 |
|
Configurable Opcode Data/Settings |
10/11 |
10/11 |
10/11 |
10/11 |
10/11 |
|
Error Message |
255 |
255 |
255 |
255 |
255 |
|
Events Log |
122 |
122 |
122 |
122 |
122 |
|
History Multiple Points |
- |
136 |
- |
- |
- |
|
History Point Configuration |
165 |
165 |
165 |
165 |
165 |
|
Hourly History Values |
130 |
130 |
130 |
130 |
130 |
|
Login Request |
17 |
17 |
17 |
17 |
17 |
|
Point Parameters (contiguous) |
166/167 |
166/167 |
166/167 |
166/167 |
166/167 |
|
Point Parameters (non-contiguous) |
180/181 |
180/181 |
180/181 |
180/181 |
180/181 |
|
ROC Configuration |
6 |
6 |
6 |
6 |
6 |
|
Sixty-Minute History |
126 |
126 |
126 |
126 |
126 |
|
Test Data |
- |
- |
2 |
2 |
- |
|
Time/Date |
7/8 |
7/8 |
7/8 |
7/8 |
7/8 |
The following table lists the point type descriptions and point type numbers used in predefined native data groups for supported Emerson ROC models. Any other valid point type can be accessed by means of a "Generic TLP Data" data group.
Note: You cannot configure a user-defined point (UDP) with the Emerson ROC EIE. If you want to configure a UDP, directly access the affected field device and make configuration changes there. After that, use the Emerson ROC EIE to define the UDP for use in CygNet so you can read its data or write data to it.
| Point Type Description | Point Type Numbers | ||||
|---|---|---|---|---|---|
| 100 | 107 | 300 | 400 | 500 | |
| AGA Flow Calculation Values | 10 | 10 | 10 | 10 | 10 |
| AGA Flow Parameters | 7 | 7 | 7 | 7 | 7 |
|
Analog Input |
3 |
3 |
3 |
3 |
3 |
|
Analog Output |
4 |
4 |
4 |
4 |
4 |
| Configurable Opcode Configuration | 0 | 0 | 0 | 0 | 0 |
| Diagnostic Points (ROC Tasks) | - | - | - | 20 | - |
|
Discrete Input |
1 |
1 |
1 |
1 |
1 |
|
Discrete Output |
2 |
2 |
2 |
2 |
2 |
|
Extra Run Parameters |
42 |
42 |
42* |
42 |
42 |
| FST Parameters | 16 | 16 | 16 | 16 | 16 |
| HART | - | 85 | - | - | - |
| I/O Point Config | 24 | 24 | 24 | 24 | 24 |
| Liquid Density Interfaces | - | 26 | - | - | - |
| Liquid Meters | - | 25 | - | - | - |
| Liquid Preferences | - | 22 | - | - | - |
| Liquid Products | - | 23 | - | - | - |
| Logon Securities | 57 | 57 | 57* | 57 | 57 |
| Meter Configuration Parameters | 46 | 46 | - | - | 46 |
| Meter Flow Values | 47 | 47 | - | - | 47 |
|
Multi-Variable Sensor |
- |
40 |
40* |
40 |
- |
|
PID Control |
6 |
6 |
- |
6 |
6 |
| PID Control (Extended) | 48 | 48 | - | - | 48 |
|
Pulse Input |
5 |
5 |
5 |
5 |
5 |
|
Soft Points |
17 |
17 |
17 |
17 |
17 |
| Soft Points Extended |
- |
98 |
- |
- |
- |
| System Flags | 13 | 13 | 13 | 13 | 13 |
| System Variables | 15 | 15 | 15 | 15 | 15 |
|
Tank Parameters |
- |
- |
11‡ |
- |
- |
*FlashPAC only. Not offered with ROCPAC.
‡ROCPAC only. Not offered with FlashPAC.
|
|
|
