UIS Command Component Parameters
The following tables list and describe the parameters specific to the UIS command component types for this remote device:
For more general information about UIS command component parameters, see UIS Command Components. The DG_F_DEV (Get data group from device) and DG_T_DEV (Send data group to device) command component types are configured in the template file. The other command component types are considered ‘special’ and are defined in the EIE editor code. See Special UIS Command Component Types for more information.
CYUPDTPT
Update CygNet Point updates the record for a CygNet point. CYUPDTPT has the following command parameters:
| Parameter | Required | Description |
|---|---|---|
|
FOnErr |
No |
Fail cmd on update error indicates to abort the UIS command if any update errors are encountered. The errors that might come up include: if the point specified in the Fac, Serv, Site, or UDC parameters does not exist, or if the point exists in a different UIS and any messaging errors or communication failure to that service comes up. |
|
Fac |
Yes |
Facility for pt identifies the facility of the point to update. |
|
Serv |
No |
Service for pt identifies the SERVICE of the point to update. |
|
Site |
No |
Site for pt identifies the SITE of the point to update. |
|
UDC |
Yes |
UDC for pt identifies the UDC of the point to update. |
|
UType |
No |
Update type indicates the type of update. Value options are 0 - 3, where 0=Completion, 1=Success, 2=Failure, 3=Creation. |
|
UsrMsk |
No |
User bit mask specifies the user bit mask of the point to update. |
|
UsrVal |
No |
User bit value to match specifies the user bit value to match when updating the point record. |
|
Value |
No |
Value indicates the point value to update. |
CYWAITPT
Wait for CygNet Point signals the UIS to wait to perform a command until the value of the specified CygNet point changes to a specified value.
CYWAITPT must be the first command component added to a UIS command. You cannot add other instances of CYWAITPT to a UIS command.
CYWAITPT has the following command parameters:
| Parameter | Required | Description |
|---|---|---|
|
Dur |
Yes |
Duration is the amount of time (in HH:MM:SS or HH:MM or HH) for the UIS command to wait for the point value to change before timing out. |
|
FOnErr |
No |
Fail on point error indicates to abort the UIS command if any error conditions are encountered. The point errors that might come up include: if the point specified in the Fac, Serv, Site, or UDC parameters does not exist, or if the point exists in a different UIS and any messaging errors or communication failure to that service comes up. |
|
Fac |
Yes |
Facility for pt identifies the facility of the point on which to wait for the point value to change before performing the UIS command. |
|
Int |
Yes |
Interval indicates the frequency (in HH:MM:SS or HH:MM or HH) with which the UIS will check the point’s value to see if it has changed. |
|
Serv |
No |
Service for pt identifies the SERVICE of the point on which to wait for the point value to change before performing the UIS command. |
|
Site |
No |
Site for pt identifies the SITE of the point on which to wait for the point value to change before performing the UIS command. |
|
UDC |
Yes |
UDC for pt identifies the UDC of the point on which to wait for the point value to change before performing the UIS command. |
|
UsrMsk |
No |
User bit mask specifies the user bit mask on which to wait for the status bit change before issuing the UIS command. Note: The user status bit parameters (UsrMsk and UsrVal) only apply to the extended status field of the point record, so they will not match anything in the base status. |
|
UsrVal |
No |
User bit value to match specifies the user bit value to match before issuing the UIS command. |
|
Value |
No |
Value to match specifies the value on which to wait for the point to change to before issuing the UIS command. Note: You can set parameters for both the point user status AND point value. So you can match either one by itself, or you can specify that both must match your parameter values. |
DG_F_DEV
Get data group from device retrieves a data group from a field device. The Parent XML Element is uccRecvParms. The following parameters are available for each specified data group type.
| Data Group Type | Parameter | Required | Description |
|---|---|---|---|
|
EDate |
No |
End Date defines the ending date and time for a date-range request. Value options are strings in formats described in Selecting Date and Time. |
|
|
MaxRec |
No |
Max Records to Read specifies the maximum possible number of records to read in a single transaction. The highest value possible for Max Records to Read is 960 or the size of the field device buffer if it is less than 960. Subsequent transactions might be required to retrieve all required data. If not specified, all remaining records will be read. Value options are integers. |
|
|
MeterId |
No |
Meter ID Override, if specified, provides a measurement meter name that is used instead of the one obtained from the field device. For instance, if a meter is identified as TX_123 at the field device but is overridden by this parameter using the identifier TX_789, the measurement system recognizes and displays only TX_789. Value options are alphanumeric characters. |
|
|
Alarms |
No |
Include Alarms, if specified, includes alarm events for the requested date-range. Value options are Boolean. |
|
|
ECDateTm |
Yes |
End Contract Date/Time defines the ending contract date and time of a date-range request for measurement events. Value options are strings in formats described in Selecting Date and Time. |
|
|
Events |
No |
Include Events, if specified, includes events for the requested date-range. Value options are Boolean. |
|
|
MeterId |
No |
Meter ID Override, if specified, provides a measurement meter name that is used instead of the one obtained from the field device. For instance, if a meter is identified as TX_123 at the field device but is overridden by this parameter using the identifier TX_789, the measurement system recognizes and displays only TX_789. Value options are alphanumeric characters. |
|
|
SCDateTm |
Yes |
Start Contract Date/Time defines the starting contract date and time of a date-range request for measurement events. Value options are strings in formats described in Selecting Date and Time. |
|
|
ECDateTm |
Yes |
End Contract Date/Time defines the ending date and time of a date-range request for measurement history. Value options are strings in formats described in Selecting Date and Time. |
|
|
MeterId |
No |
Meter ID Override, if specified, provides a measurement meter name that is used instead of the one obtained from the field device. For instance, if a meter is identified as TX_123 at the field device but is overridden by this parameter using the identifier TX_789, the measurement system recognizes and displays only TX_789. Value options are alphanumeric characters. |
|
|
SCDateTm |
Yes |
Start Contract Date/Time defines the starting date and time of a date-range request for measurement history. Value options are strings in formats described in Selecting Date and Time. |
|
|
EDate |
No |
End Date defines the ending date and time for a date-range request. Value options are strings in formats described in Selecting Date and Time. |
|
|
MaxRec |
No |
Max Records to Read specifies the maximum possible number of records to read in a single transaction. The highest value possible for Max Records to Read is 960 or the size of the field device buffer if it is less than 960. Subsequent transactions might be required to retrieve all required data. If not specified, all remaining records will be read. Value options are integers. |
|
|
EDate |
No |
End Date defines the ending date and time for a date-range request. Value options are strings in formats described in Selecting Date and Time. |
|
|
MaxRec |
No |
Max records to save in DDS specifies the maximum number of records to save in a single transaction. Value options are integers. |
|
|
SDate |
No |
Start Date defines the starting date and time for a date-range request. Value options are strings in formats described in Selecting Date and Time. |
|
|
EDate |
No |
End Date defines the ending date and time for a date-range request. Value options are strings in formats described in Selecting Date and Time. |
|
|
MaxRec |
No |
Max Records to Read specifies the maximum possible number of records to read in a single transaction. The highest value possible for Max Records to Read is 960 or the size of the field device buffer if it is less than 960. Subsequent transactions might be required to retrieve all required data. If not specified, all remaining records will be read. Value options are integers. |
|
|
SDate |
No |
End Date defines the ending date and time for a date-range request. Value options are strings in formats described in Selecting Date and Time. |
|
|
EDate |
No |
End Date defines the ending date and time for a date-range request. Value options are strings in formats described in Selecting Date and Time. |
|
|
MaxRec |
No |
Max Records to Read specifies the maximum possible number of records to read in a single transaction. The highest value possible for Max Records to Read is 960 or the size of the field device buffer if it is less than 960. Subsequent transactions might be required to retrieve all required data. If not specified, all remaining records will be read. Value options are integers. |
|
|
EDate |
No |
End Date defines the ending date and time for a date-range request. Value options are strings in formats described in Selecting Date and Time. |
|
|
MaxRec |
No |
Max Records to Read specifies the maximum possible number of records to read in a single transaction. The highest value possible for Max Records to Read is 960 or the size of the field device buffer if it is less than 960. Subsequent transactions might be required to retrieve all required data. If not specified, all remaining records will be read. Value options are integers. |
|
|
EDate |
No |
End Date defines the ending date and time for a date-range request. Value options are strings in formats described in Selecting Date and Time. |
|
|
MaxRec |
No |
Max Records to Read specifies the maximum possible number of records to read in a single transaction. The highest value possible for Max Records to Read is 960 or the size of the field device buffer if it is less than 960. Subsequent transactions might be required to retrieve all required data. If not specified, all remaining records will be read. Value options are integers. |
|
|
EDate |
No |
End Date defines the ending date and time for a date-range request. Value options are strings in formats described in Selecting Date and Time. |
|
|
MaxRec |
No |
Max Records to Read specifies the maximum possible number of records to read in a single transaction. The highest value possible for Max Records to Read is 960 or the size of the field device buffer if it is less than 960. Subsequent transactions might be required to retrieve all required data. If not specified, all remaining records will be read. Value options are integers. |
DG_T_DEV
Send data group to device sends a data group to a field device. The parent XML Element is uccSendParms. The following parameters are available for each specified data group type.
| Data Group Type | Parameter | Required | Description |
|---|---|---|---|
|
CommandId |
Yes |
Command ID defines the Command Action (CA) to be enacted by the "Command Message" (CmdMsg) data group. Value options are as follows:
|
|
|
ClrTot |
No |
Clear Totals
Value options are low=0, high=1. |
|
|
DoTrig |
No |
DO Trigger |
|
|
ManOff |
No |
Start Off-Cycle
Value options are low=0, high=1. |
|
|
ManOn |
No |
Start On-Cycle
Value options are low=0, high=1. |
|
|
TubClose |
No |
Close Tubing Valve
Value options are low=0, high=1. |
|
|
TubOpen |
No |
Open Tubing Valve
Value options are low=0, high=1. |
|
|
GasParms (Gas Parameters) |
AtmPres |
No |
Atmospheric Press
Value options are floating-point numbers. |
|
CPrime |
No |
C Prime
Value options are floating-point numbers. |
|
|
DpCutOff |
No |
Low DP Cutoff
Value options are floating-point numbers. |
|
|
InjMtrFlg |
No |
Gas Meter Inj |
|
|
IntlUnits |
No |
International Units |
|
|
Send |
Yes |
Send to device sends data to the device. Value options are Boolean. |
|
|
VolToday |
No |
Volume Today
Value options are floating-point numbers. |
|
|
VolYest |
No |
Volume Yesterday
Value options are floating-point numbers. |
|
|
GasParms (Gas Parms) |
Send |
Yes |
Send to device sends data to the device. Value options are Boolean. |
