Returns/sets the appearance of the object boundary

Possible values for this property are as follows.

• 0 – Flat
• 1 – 3D

Default value is 0 - Flat

Returns/sets the starting date of the FMS Jobs control

This string can be in one of the following forms.

• Absolute date - for example: 1/31/2022
• Relative date - for example: T (today), T-14 (14 days prior to today), or T+1 (one day following today)

Default value is T-7

Returns/sets the border style

Possible values for this property are as follows.

• 0 - None
• 1 - Fixed Single

Default value is 0 - None

Returns/sets whether or not the user can select multiple Nodes in the Node chooser

Possible values for this property are as follows.

• 0 - No
• 1 - Yes

Default value is 1 - Yes

Returns/sets the filter to be used when retrieving Nodes

Wildcard values * (multiple character) and ? (single character) are supported. Wildcards can be used in any part of the string to specify that any character or set of characters is allowed in its place.

Example

A filter string of “*Test*” will retrieve all Nodes with the word “Test” somewhere in the string, such as “TestDevice” or “MyTestDevice” or “Device001Test”.

Default value is * (multiple character wildcard)

Returns/sets the Node property that will be filtered by the string specified in the ChooserFilterString property

Possible values for this property are as follows.

• 0 – Name
• 1 – Description
• 2 – ID

Default value is 0 - Name

Returns/sets the group currently selected in the Node chooser’s Group combo box

Returns/sets the Node category currently selected in the Node chooser’s Node category combo box

Possible values for this property are as follows.

• 1 – Node_Category1_Device
• 2 – Node_Category1_Group
• 3 – Node_Category1_Station
• 6 – Node_Category1_Any
• 8 – Node_Category1_Gas_Device
• 9 – Node_Category1_Liquid_Device
• 13 – Node_Category1_Accessory

Default value is 8 - Node_Category1_Gas_Device

Returns/sets whether or not the Node chooser’s Node category combo box is visible

Possible values for this property are as follows.

• 0 - No
• 1 - Yes

Default value is 1 - Yes

Returns/sets the primary sort column of the Node chooser’s Node list

Possible values for this property are as follows.

• 0 - Type ascending
• 2 - Name ascending
• 3 - Description ascending
• 4 - Type descending
• 5 - Name descending
• 6 - Description descending

Default value is 2 - Name ascending

Returns/sets the Site.Service currently selected in the Node chooser’s FMS combo box

Returns/sets whether or not the Node chooser’s FMS combo box is visible

Possible values for this property are as follows.

• 0 - No
• 1 - Yes

Default value is 1 - Yes

Returns/sets the XML specifying the custom FMS commands configured for the control

Another way to configure this property is to use the control’s property page.

Returns/sets the format of the dates shown in the FMS Jobs control

Possible values for this property are as follows.

• 0 — Device time
• 1 — Contract time
• 2 — Local time

Default value is 0 — Device time

Returns/sets the ending date of the FMS Jobs control

This string can be in one of the following forms.

• Absolute date - for example: 1/31/2022
• Relative date - for example: T (today), T-14 (14 days prior to today), or T+1 (one day following today)

Default value is T

Returns/sets the font used by the FMS Jobs control

Click … to access the Font dialog box to make font selections.

Default value is MS Shell Dlg.

Returns/sets the type of jobs to display in the FMS Jobs control

Type the name of a job type into the text box to define the filter view desired.

Options are as follows.

• <Any>
• Auto-calibration
• Calibration
• Gas Sample
• [User-supplied value options]

Default value is <Any> jobs.

Returns/sets the Point in Time date and time of the FMS Jobs control

This string can be in one of the following forms.

• Absolute Date/Time - for example: 1/31/2022 7:10:14 AM
• Relative Date/Time - for example: y-1 m-2 d=15 H=5 M=30 S=0
• Relative Day - an offset from the current day T, for example: T-10

Default value is T, date and time today.

See Using the Home Menu for more information about PIT mode.

Returns/sets the Session starting date for the time window displayed in the control

This string can be in one of the following forms.

• Absolute date - for example: 1/31/2022
• Relative date - for example: T (today), T-14 (14 days prior to today), or T+1 (one day following today

Returns/sets the Session date/time format for the time window displayed in the control

Possible values for this property are as follows.

• 0 – Device_Time
• 1 – Contract_Time
• 2 – Local_Time

Returns/sets the Session ending date for the time window displayed in the control

This string can be in one of the following forms.

• Absolute date - for example: 1/31/2022
• Relative date - for example: T (today), T-14 (14 days prior to today), or T+1 (one day following today)

Returns/sets the Session Node tag, which specifies the active Node in the FMS Jobs control

This tag must be in the form SITE.SERVICE|ID (for example, TEST.FMS|2540).

Returns/sets whether or not jobs with a status of "Approved" will be displayed in the control

Possible values for this property are as follows.

• 0 - No
• 1 - Yes

Default value is 1 - Yes

Alternatively, use the CygNet FMS Jobs Control Properties dialog box ((OCX Properties) > Jobs page, then Display the following job statuses check box list) to define.

Returns/sets whether or not jobs with a status of "Blocked" will be displayed in the control

Possible values for this property are as follows.

• 0 - No
• 1 - Yes

Default value is 1 - Yes

Alternatively, use the CygNet FMS Jobs Control Properties dialog box ((OCX Properties) > Jobs page, then Display the following job statuses check box list) to define.

Returns/sets whether or not the Chooser pane will be displayed in the control

Possible values for this property are as follows.

• 0 - No
• 1 - Yes

Default value is 1 - Yes

Returns/sets whether or not jobs with a status of "Completed" will be displayed in the control

Possible values for this property are as follows.

• 0 - No
• 1 - Yes

Default value is 1 - Yes

Alternatively, use the CygNet FMS Jobs Control Properties dialog box ((OCX Properties) > Jobs page, then Display the following job statuses check box list) to define.

Returns/sets whether or not jobs with a status of "Missing Data" will be displayed in the control

Possible values for this property are as follows.

• 0 - No
• 1 - Yes

Default value is 1 - Yes

Alternatively, use the CygNet FMS Jobs Control Properties dialog box ((OCX Properties) > Jobs page, then Display the following job statuses check box list) to define.

Returns/sets whether or not jobs with a status of "Open" will be displayed in the control

Possible values for this property are as follows.

• 0 - No
• 1 - Yes

Default value is 1 - Yes

Alternatively, use the CygNet FMS Jobs Control Properties dialog box ((OCX Properties) > Jobs page, then Display the following job statuses check box list) to define.

Returns/sets whether or not the Options pane will be displayed in the control

Possible values for this property are as follows.

• 0 - No
• 1 - Yes

Default value is 1 - Yes

Returns/sets whether or not jobs with a status of "Pending Approval" will be displayed in the control

Possible values for this property are as follows.

• 0 - No
• 1 - Yes

Default value is 1 - Yes

Alternatively, use the CygNet FMS Jobs Control Properties dialog box ((OCX Properties) > Jobs page, then Display the following job statuses check box list) to define.

Returns/sets whether or not jobs with a status of "Review" will be displayed in the control

Possible values for this property are as follows.

• 0 - No
• 1 - Yes

Default value is 1 - Yes

Alternatively, use the CygNet FMS Jobs Control Properties dialog box ((OCX Properties) > Jobs page, then Display the following job statuses check box list) to define.

Returns/sets whether or not jobs with a status of "Verified" will be displayed in the control

Possible values for this property are as follows.

• 0 - No
• 1 - Yes

Default value is 1 - Yes

Alternatively, use the CygNet FMS Jobs Control Properties dialog box ((OCX Properties) > Jobs page, then Display the following job statuses check box list) to define.

Returns/sets whether or not jobs with a status of "Waiting for Events" will be displayed in the control

Possible values for this property are as follows.

• 0 - No
• 1 - Yes

Default value is 1 - Yes

Alternatively, use the CygNet FMS Jobs Control Properties dialog box ((OCX Properties) > Jobs page, then Display the following job statuses check box list) to define.

Returns/sets the unit set used to determine the units of each FMS data item in the FMS Jobs control

Another way to configure this property is to use either the control’s property page or to use the Options page on the FMS Jobs control.

Default value is the <Default> unit set

Returns/sets whether or not the PITDateTime property will be used

Possible values for this property are as follows.

• 0 – No
• 1 – Yes

Default value is 0 - No

Returns/sets whether or not the SessionNodeTag property will specify the active Node in the FMS Jobs Grid

If this property is set to 0 - No, the FMS Jobs Grid will present a Chooser page for selection of the active Node.

Possible values for this property are as follows.

• 0 - No
• 1 - Yes

Default value is 1 - Yes