Supported Tokens for Device Data CSV Exports
In general, tokens supported for the export definition file used to define Device Data CSV exports are equivalent to the data item tokens (Data Table Tokens) supported for Device QTR, Gas Device Raw QTR, or Liquid Device Raw QTR reports, but there are differences in both content and format. Some tokens are supported in one format and not the other. Also, whereas the QTR reports recognize valid token names enclosed in brackets [TokenName], the EDF files recognize equivalent valid token names enclosed in quotation marks "TokenName".
Additionally, different token sets are supported depending on whether you are exporting normalized or raw (gas or liquid) data. For more information about valid token names for normalized or raw data, see the following:
- For normalized data, see the Normalized Data Tokens table below, or see tokens listed for:
- Configuring the Report Sheet in the (Gas) Device QTR Report Templates topic
- For raw data, see the Raw Data Tokens table below, or see tokens listed for:
- Configuring the Report Sheet in the Gas Device Raw QTR Report Templates topic
- Configuring the Report Sheet in the Liquid Device Raw QTR Report Templates topic
Example
Valid token for QTR reports = [TokenName]
Valid token for EDF = "TokenName"
See Export: Device Data CSV for more information about preparing and exporting .csv files that utilize an .edf file.
Displaying Beginning or Ending Values for a Record
Some data item tokens (for normalized data) have variants you can use to display the beginning or ending values for a record. Append _Begin to the token text to show the beginning value for the record period. Append _End to the token text to show the ending value for the record period. You can then view data values or configuration settings in effect at either the beginning or end of each record span (e.g. hourly, daily) as desired. Examples of valid appended tokens are listed in the Configuration Item, Gas Quality Item, and Liquid Periodic Metering PV Item sections of the tables below.
Displaying Flow-Weighted Average Values for a Record
Some tokens for gas metering process variable values (for normalized data) have a variant you can use to display the flow-weighted average value for records in your report. Tokens utilizing this version are valid for [Energy_Average_FW], [Mass_Average_FW], [Volume_Average_FW], and are listed in the table, below.
Supported Data Item Tokens
Supported data items depend on the data type, whether normalized or raw.
Normalized Data Tokens
Supported data items for normalized data can be described by the following tokens when configuring device data files for export to CSV.
| Token | Description |
|---|---|
| General Tokens | |
| "NodeDesc" | Node description |
| "NodeName" | Node name |
| "NodePollingFacilityId" | Node's polling facility ID |
| "NodePollingSiteService" | Node's polling Site.Service |
| "NodeReportingFacilityId" | Node's reporting facility ID |
| "NodeReportingSiteService" | Node's reporting Site.Service |
| "BeginDate" | Start date, in Contract day (C), of the time range for the record |
| "BeginTime" | Start time of the time range for the record |
| "DataSource" | Source of data for the record, e.g. polling engine, device import, other |
| "GasQualitySource" | Source of gas quality data for the record |
| "DataQualityDesc" | Description of the data quality setting |
| "DataQualityName" | Name of the data quality setting |
| "Acceptability" | Numerical percentage value indicating the relative validity of the data |
| "AuditCategory" | Category of the change |
| "AuditComment" | Comments regarding the change |
| "AuditDate_Host" | Date of the change, relative to the host computer |
| "AuditUserName" | Name of the user that made the change |
| "ExceptionCount" | Total number of exceptions for the record |
| "LinkExceptionCount" | Number of linked exceptions for the record |
| "OpenExceptionCount" | Number of open exceptions for the record |
| "RecordsInSpan" | Number of gas device summary records for the time span |
|
"IsEdited" |
User-edited status of the data. Possible values are as follows.
Any edit to the record produces a value of Yes. |
|
"EditState" |
Edit state of the record in the system. Possible values are as follows.
|
| "GMCollectionStatus" | Data state of gas metering records |
| "GQCollectionStatus" | Data state of gas quality records |
| "EventCollectionStatus" | Data state of event records |
| "AlarmCollectionStatus" | Data state of alarm records |
| "Dp" | Differential pressure |
| "Energy" | Energy value |
| "Energy_Average_FW" | Energy value: flow-weighted average |
| "FlowRate" | Flow rate |
| "FlowTime" | Flow time |
| "FlowTimePercent" | Flow time percentage |
| "IMV" | Integral Multiplier Value |
|
"IV" |
Integral Value Definition Defines the calculation variables used, where applicable |
| "KFactorMass" | K Factor - Mass |
| "KFactorVolume" | K Factor - Volume |
| "Mass" | Mass value |
| "Mass_Average_FW" |
Mass value: flow-weighted average |
| "PulseCount" | Pulse count |
| "Sp" | Static pressure |
| "Temp" | Temperature |
| "UncorrectedVolume" | Uncorrected volume |
|
"VCF" |
Volume Correction Factor See Data Aggregation for more information about how this factor is averaged. |
| "Volume" | Volume value |
| "Volume_Average_FW" |
Volume value: flow-weighted average |
| Custom Gas Metering PV Item Tokens | |
|
"CustomGM1" |
Custom-defined GM process variable 1 See Remote Devices for your device type and EFM Data Items for more information. |
|
"CustomGM2" |
Custom-defined GM process variable 2 See Remote Devices for your device type and EFM Data Items for more information. |
|
"CustomGM3" |
Custom-defined GM process variable 3 See Remote Devices for your device type and EFM Data Items for more information. |
|
"CustomGM4" |
Custom-defined GM process variable 4 See Remote Devices for your device type and EFM Data Items for more information. |
|
"CustomGM5" |
Custom-defined GM process variable 5 See Remote Devices for your device type and EFM Data Items for more information. |
| Configuration Item Tokens
Note: You can append _Begin or _End to any of the following configuration item tokens, in order to display the first or last value for the record. See Displaying Beginning or Ending Values for a Record for more information. |
|
|
"ConfigExceptionCnt" "ConfigExceptionCnt_Begin" "ConfigExceptionCnt_End" |
Number of configuration exceptions for the record |
|
"ConfigLogAuditCategory" "ConfigLogAuditCategory_Begin" "ConfigLogAuditCategory_End" |
Category for the configuration log audit record |
|
"ConfigLogAuditComment" "ConfigLogAuditComment_Begin" "ConfigLogAuditComment_End" |
Comment for the configuration log audit record |
|
"ConfigLogAuditUserName" "ConfigLogAuditUserName_Begin" "ConfigLogAuditUserName_End" |
Username for the configuration log audit record |
|
"ConfigLogDateTime" "ConfigLogDateTime_Begin" "ConfigLogDateTime_End" |
Date/time of the configuration log |
|
"ConfigLogSource" "ConfigLogSource_Begin" "ConfigLogSource_End" |
Source of the configuration See Configure Filter in the Using the Configuration Control topic for more information about configuration source types. |
|
"AGA3ExpandedRange" "AGA3ExpandedRange_Begin" "AGA3ExpandedRange_End" |
See FMS Configuration Data Items for descriptions of these items. |
|
"AGA8ExpandedRange" "AGA8ExpandedRange_Begin" "AGA8ExpandedRange_End" See AGA 8 Data Ranges for more information. |
|
|
"AtmosphericPressure" "AtmosphericPressure_Begin" "AtmosphericPressure_End" |
|
|
"BaseCompressibilityOfAir" "BaseCompressibilityOfAir_Begin" "BaseCompressibilityOfAir_End" |
|
|
"BasePressure" "BasePressure_Begin" "BasePressure_End" |
|
|
"BaseTemperature" "BaseTemperature_Begin" "BaseTemperature_End" |
|
|
"CalibrationFactor" "CalibrationFactor_Begin" "CalibrationFactor_End" |
|
|
"ConeCoefficientThermalExpansion" "ConeCoefficientThermalExpansion_Begin" "ConeCoefficientThermalExpansion_End" |
|
|
"ConeDiameter" "ConeDiameter_Begin" "ConeDiameter_End" |
|
|
"ConeMaterial" "ConeMaterial_Begin" "ConeMaterial_End" |
|
|
"ConeRefTemp" "ConeRefTemp_Begin" "ConeRefTemp_End" |
|
|
"ContractHour" "ContractHour_Begin" "ContractHour_End" |
|
|
"CoriolisCalibrationPressure" "CoriolisCalibrationPressure_Begin" "CoriolisCalibrationPressure_End" |
|
|
"CoriolisPressureEffect" "CoriolisPressureEffect_Begin" "CoriolisPressureEffect_End" |
|
|
"DeviceDesc" "DeviceDesc_Begin" "DeviceDesc_End" |
|
|
"DeviceName" "DeviceName_Begin" "DeviceName_End" |
|
|
"DeviceType" "DeviceType_Begin" "DeviceType_End" |
|
|
"DischargeCoefficient" "DischargeCoefficient_Begin" "DischargeCoefficient_End" |
|
|
"DischargeCoefficientCalc" "DischargeCoefficientCalc_Begin" "DischargeCoefficientCalc_End" |
|
|
"DpAlarmHigh" "DpAlarmHigh_Begin" "DpAlarmHigh_End" |
|
|
"DpAlarmLow" "DpAlarmLow_Begin" "DpAlarmLow_End" |
|
|
"DpBackflowAlarm" "DpBackflowAlarm_Begin" "DpBackflowAlarm_End" |
|
|
"DpCalibrateHigh" "DpCalibrateHigh_Begin" "DpCalibrateHigh_End" |
|
|
"DpCalibrateLow" "DpCalibrateLow_Begin" "DpCalibrateLow_End" |
|
|
"DpTapsType" "DpTapsType_Begin" "DpTapsType_End" |
|
|
"DpTransducerRangeLow" "DpTransducerRangeLow_Begin" "DpTransducerRangeLow_End" |
|
|
"DpTransducerRangeHigh" "DpTransducerRangeHigh_Begin" "DpTransducerRangeHigh_End" |
|
|
"Elevation" "Elevation_Begin" "Elevation_End" |
|
|
"FixedTemp" "FixedTemp_Begin" "FixedTemp_End" |
|
|
"FlowRateAlarmHigh" "FlowRateAlarmHigh_Begin" "FlowRateAlarmHigh_End" |
|
|
"FlowRateAlarmLow" "FlowRateAlarmLow_Begin" "FlowRateAlarmLow_End" |
|
|
"FluidType" "FluidType_Begin" "FluidType_End" |
|
|
"FpvCalc" "FpvCalc_Begin" "FpvCalc_End" |
|
|
"GasExpansionFactorCalc" "GasExpansionFactorCalc_Begin" "GasExpansionFactorCalc_End" |
|
|
"HeatingValueBasis" "HeatingValueBasis_Begin" "HeatingValueBasis_End" |
|
|
"HvCalc" "HvCalc_Begin" "HvCalc_End" |
|
|
"IntegralValueVariables" "IntegralValueVariables_Begin" "IntegralValueVariables_End" |
|
|
"IsentropicExponent" "IsentropicExponent_Begin" "IsentropicExponent_End" |
|
|
"KFactorMass" "KFactorMass_Begin" "KFactorMass_End" |
|
|
"KFactorVolume" "KFactorVolume_Begin" "KFactorVolume_End" |
|
|
"LinearCurveType" "LinearCurveType_Begin" "LinearCurveType_End" |
|
|
"LowFlowCutoffDp" "LowFlowCutoffDp_Begin" "LowFlowCutoffDp_End" |
|
|
"LowFlowCutoffFlowRate" "LowFlowCutoffFlowRate_Begin" "LowFlowCutoffFlowRate_End" |
|
|
"LowFlowCutoffMass" "LowFlowCutoffMass_Begin" "LowFlowCutoffMass_End" |
|
|
"LowFlowCutoffPulseInterval" "LowFlowCutoffPulseInterval_Begin" "LowFlowCutoffPulseInterval_End" |
|
|
"MeterFactor" "MeterFactor_Begin" "MeterFactor_End" |
|
|
"MeterTubeInsideDiameter" "MeterTubeInsideDiameter_Begin" "MeterTubeInsideDiameter_End" |
|
|
"MeterTubeMaterial" "MeterTubeMaterial_Begin" "MeterTubeMaterial_End" |
|
|
"MeterTubeRefTemp" "MeterTubeRefTemp_Begin" "MeterTubeRefTemp_End" |
|
|
"OrificeCoefficientThermalExpansion" "OrificeCoefficientThermalExpansion_Begin" "OrificeCoefficientThermalExpansion_End" |
|
|
"OrificePlateBoreSize" "OrificePlateBoreSize_Begin" "OrificePlateBoreSize_End" |
|
|
"OrificePlateMaterial" "OrificePlateMaterial_Begin" "OrificePlateMaterial_End" |
|
|
"OrificePlateRefTemp" "OrificePlateRefTemp_Begin" "OrificePlateRefTemp_End" |
|
|
"PipeCoefficientThermalExpansion" "PipeCoefficientThermalExpansion_Begin" "PipeCoefficientThermalExpansion_End" |
|
|
"PrimaryCalc" "PrimaryCalc_Begin" "PrimaryCalc_End" |
|
|
"SpAlarmHigh" "SpAlarmHigh_Begin" "SpAlarmHigh_End" |
|
|
"SpAlarmLow" "SpAlarmLow_Begin" "SpAlarmLow_End" |
|
|
"SpCalibrateHigh" "SpCalibrateHigh_Begin" "SpCalibrateHigh_End" |
|
|
"SpCalibrateLow" "SpCalibrateLow_Begin" "SpCalibrateLow_End" |
|
|
"SpTapLocation" "SpTapLocation_Begin" "SpTapLocation_End" |
|
|
"SpTransducerRangeHigh" "SpTransducerRangeHigh_Begin" "SpTransducerRangeHigh_End" |
|
|
"SpTransducerRangeLow" "SpTransducerRangeLow_Begin" "SpTransducerRangeLow_End" |
|
|
"SpType" "SpType_Begin" "SpType_End" |
|
|
"TempAlarmHigh" "TempAlarmHigh_Begin" "TempAlarmHigh_End" |
|
|
"TempAlarmLow" "TempAlarmLow_Begin" "TempAlarmLow_End" |
|
|
"TempCalibrateHigh" "TempCalibrateHigh_Begin" "TempCalibrateHigh_End" |
|
|
"TempCalibrateLow" "TempCalibrateLow_Begin" "TempCalibrateLow_End" |
|
|
"TempCalibrateZero" "TempCalibrateZero_Begin" "TempCalibrateZero_End" |
|
|
"TempTransducerRangeHigh" "TempTransducerRangeHigh_Begin" "TempTransducerRangeHigh_End" |
|
|
"TempTransducerRangeLow" "TempTransducerRangeLow_Begin" "TempTransducerRangeLow_End" |
|
|
"UseCoriolisPressureEffect" "UseCoriolisPressureEffect_Begin" "UseCoriolisPressureEffect_End" |
|
|
"UseLiveTemp" "UseLiveTemp_Begin" "UseLiveTemp_End" |
|
|
"WaterVaporCorrectionFactor" "WaterVaporCorrectionFactor_Begin" "WaterVaporCorrectionFactor_End" |
|
|
"WellStreamFactor" "WellStreamFactor_Begin" "WellStreamFactor_End" |
|
| Custom Configuration Item Tokens | |
|
"CustomConfig1" "CustomConfig1_Begin" "CustomConfig1_End" |
Custom-defined FMS Configuration Data Items See Remote Devices for your device type and FMS Configuration Data Items for more information. |
|
"CustomConfig2" "CustomConfig2_Begin" "CustomConfig2_End" |
|
|
"CustomConfig3" "CustomConfig3_Begin" "CustomConfig3_End" |
|
|
"CustomConfig4" "CustomConfig4_Begin" "CustomConfig4_End" |
|
|
"CustomConfig5" "CustomConfig5_Begin" "CustomConfig5_End" |
|
|
"CustomConfig6" "CustomConfig6_Begin" "CustomConfig6_End" |
|
|
"CustomConfig7" "CustomConfig7_Begin" "CustomConfig7_End" |
|
|
"CustomConfig8" "CustomConfig8_Begin" "CustomConfig8_End" |
|
|
"CustomConfig9" "CustomConfig9_Begin" "CustomConfig9_End" |
|
|
"CustomConfig10" "CustomConfig10_Begin" "CustomConfig10_End" |
|
| Gas Quality Item Tokens | |
|
"Methane" "Methane_Begin" "Methane_End" |
Methane (C1) |
|
"Ethane" "Ethane_Begin" "Ethane_End" |
Ethane (C2) |
|
"Propane" "Propane_Begin" "Propane_End" |
Propane (C3) |
|
"n-Butane" "n-Butane_Begin" "n-Butane_End" |
n-Butane (C4) |
|
"Isobutane" "Isobutane_Begin" "Isobutane_End" |
Isobutane (isoC4) |
|
"n-Pentane" "n-Pentane_Begin" "n-Pentane_End" |
n-Pentane (C5) |
|
"Isopentane" "Isopentane_Begin" "Isopentane_End" |
Isopentane (isoC5) |
|
"Neopentane" "Neopentane_Begin" "Neopentane_End" |
Neopentane (neoC5) |
|
"n-Hexane" "n-Hexane_Begin" "n-Hexane_End" |
n-Hexane (C6) |
|
"n-Heptane" "n-Heptane_Begin" "n-Heptane_End" |
n-Heptane (C7) |
|
"n-Octane" "n-Octane_Begin" "n-Octane_End" |
n-Octane (C8) |
|
"n-Nonane" "n-Nonane_Begin" "n-Nonane_End" |
n-Nonane (C9) |
|
"n-Decane" "n-Decane_Begin" "n-Decane_End" |
n-Decane (C10) |
|
"Argon" "Argon_Begin" "Argon_End" |
Argon (Ar) |
|
"CarbonDioxide" "CarbonDioxide_Begin" "CarbonDioxide_End" |
Carbon dioxide (CO2) |
|
"CarbonMonoxide" "CarbonMonoxide_Begin" "CarbonMonoxide_End" |
Carbon monoxide (CO) |
|
"Helium" "Helium_Begin" "Helium_End" |
Helium (He) |
|
"Hydrogen" "Hydrogen_Begin" "Hydrogen_End" |
Hydrogen (H2) |
|
"HydrogenSulfide" "HydrogenSulfide_Begin" "HydrogenSulfide_End" |
Hydrogen sulfide (H2S) |
|
"Nitrogen" "Nitrogen_Begin" "Nitrogen_End" |
Nitrogen (N2) |
|
"Oxygen" "Oxygen_Begin" "Oxygen_End" |
Oxygen (O2) |
|
"Water" "Water_Begin" "Water_End" |
Water (H2O) |
|
"Compressibility" "Compressibility_Begin" "Compressibility_End" |
Compressibility |
|
"DewPoint" "DewPoint_Begin" "DewPoint_End" |
Dew point |
|
"HeatingValueMass" "HeatingValueMass_Begin" "HeatingValueMass_End" |
Heating value mass |
|
"HeatingValueVolume" "HeatingValueVolume_Begin" "HeatingValueVolume_End" |
Heating value volume |
|
"RelativeDensity" "RelativeDensity_Begin" "RelativeDensity_End" |
Relative density |
|
"Viscosity" "Viscosity_Begin" "Viscosity_End" |
Viscosity |
| Custom Gas Quality Item Tokens | |
|
"CustomGQ1" |
Custom-defined GQ process variables See Remote Devices for your device type and EFM Data Items for more information. |
|
"CustomGQ2" |
|
|
"CustomGQ3" |
|
|
"CustomGQ4" |
|
|
"CustomGQ5" |
|
| Gas Analysis Item Tokens - liquid content | |
|
"EthaneLC" "EthaneLC_Begin" "EthaneLC_End" |
Ethane (C2) liquid content |
|
"PropaneLC" "PropaneLC_Begin" "PropaneLC_End" |
Propane (C3) liquid content |
|
"n-ButaneLC" "n-ButaneLC_Begin" "n-ButaneLC_End" |
n-Butane (C4) liquid content |
|
"IsobutaneLC" "IsobutaneLC_Begin" "IsobutaneLC_End" |
Isobutane (isoC4) liquid content |
|
"n-PentaneLC" "n-PentaneLC_Begin" "n-PentaneLC_End" |
n-Pentane (C5) liquid content |
|
"IsopentaneLC" "IsopentaneLC_Begin" "IsopentaneLC_End" |
Isopentane (isoC5) liquid content |
|
"n-HexaneLC" "n-HexaneLC_Begin" "n-HexaneLC_End" |
n-Hexane (C6) liquid content |
|
"n-HeptaneLC" "n-HeptaneLC_Begin" "n-HeptaneLC_End" |
n-Heptane (C7) liquid content |
|
"n-OctaneLC" "n-OctaneLC_Begin" "n-OctaneLC_End" |
n-Octane (C8) liquid content |
|
"n-NonaneLC" "n-NonaneLC_Begin" "n-NonaneLC_End" |
n-Nonane (C9) liquid content |
|
"n-DecaneLC" "n-DecaneLC_Begin" "n-DecaneLC_End" |
n-Decane (C10) liquid content |
|
"CondensateLC" "CondensateLC_Begin" "CondensateLC_End" |
Condensate liquid content |
|
"H2SPPM" "H2SPPM_Begin" "H2SPPM_End" |
Hydrogen sulfide |
|
"TotalH2SPPM" "TotalH2SPPM_Begin" "TotalH2SPPM_End" |
Total Hydrogen sulfide |
|
"COSPPM" "COSPPM_Begin" "COSPPM_End" |
Carbonyl sulfide |
|
"MESHPPM" "MESHPPM_Begin" "MESHPPM_End" |
Methanethiol |
|
"ETSHPPM" "ETSHPPM_Begin" "ETSHPPM_End" |
Ethanethiol |
|
"DMSPPM" "DMSPPM_Begin" "DMSPPM_End" |
Dimethyl sulfide |
Raw Data Tokens
Supported data items for raw data can be described by the following tokens when configuring device data files for export to CSV.
| Token | Description |
|---|---|
| General Tokens | |
| "NodeDesc" | Node description |
| "NodeName" | Node name |
| "NodePollingFacilityId" | Node polling facility ID |
| "NodePollingSiteService" | Node polling Site.Service |
| "NodeReportingFacilityId" | Node reporting facility ID |
| "NodeReportingSiteService" | Node reporting Site.Service |
|
"BeginNormalizedDateTime" "BeginNormalizedDateTime_Begin" "BeginNormalizedDateTime_End" |
Beginning date/time (normalized) of the raw record, in Device time (D) |
|
"BeginDateTime" "BeginDateTime_Begin" "BeginDateTime_End" |
Start date/time, in Contract time (C), of the time range for the record |
|
"EndDateTime" "EndDateTime_Begin" "EndDateTime_End" |
End date/time, in Contract time (C), of the time range for the record |
|
"DataSource" "DataSource_Begin" "DataSource_End" |
Source of metering data for the record, e.g. polling engine, device import, other |
|
"GasQualitySource" "GasQualitySource_Begin" "GasQualitySource_End" |
Source of gas quality data for the record |
| "GasMetering_AuditCategory" | Category of the change |
| "GasMetering_AuditComments" | Comments regarding the change |
| "GasMetering_AuditDate_Host" | Date of the change, relative to the host computer |
| "GasMetering_AuditUserName" | Name of the user that made the change |
| "GasQuality_AuditCategory" | Category of the change |
| "GasQuality_AuditComments" | Comments regarding the change |
| "GasQuality_AuditDate_Host" | Date of the change, relative to the host computer |
| "GasQuality_AuditUserName" | Name of the user that made the change |
| Gas or Shared Periodic Metering PV Item Tokens | |
| "Dp" | Differential pressure |
| "Energy" | Energy value |
| "FlowRate" | Flow rate |
| "FlowTime" | Flow time |
| "IMV" | Integral Multiplier Value |
| "IV" |
Integral Value Definition Defines the calculation variables used, where applicable |
| "KFactorMass" | K Factor - Mass |
| "KFactorVolume" | K Factor - Volume |
| "Mass" | Mass value |
| "MeterFactor" | Meter factor |
| "PulseCount" | Pulse count |
| "Sp" | Static pressure |
| "Temp" | Temperature |
| "UncorrectedVolume" | Uncorrected volume |
| "Volume" | Volume value |
| Custom Gas Periodic Metering PV Item Tokens | |
|
"CustomGM1" |
Custom-defined GM process variable 1 See Remote Devices for your device type and EFM Data Items for more information. |
|
"CustomGM2" |
Custom-defined GM process variable 2 See Remote Devices for your device type and EFM Data Items for more information. |
|
"CustomGM3" |
Custom-defined GM process variable 3 See Remote Devices for your device type and EFM Data Items for more information. |
|
"CustomGM4" |
Custom-defined GM process variable 4 See Remote Devices for your device type and EFM Data Items for more information. |
|
"CustomGM5" |
Custom-defined GM process variable 5 See Remote Devices for your device type and EFM Data Items for more information. |
| Liquid Periodic Metering PV Item Tokens - Correction Factors | |
| "CSW" | Sediment and Water correction factor |
| "CTL" | Temperature correction factor |
| "CPL" | Pressure correction factor |
| "CTPL" | Temperature and Pressure correction factor |
| "CCF" | Combined correction factor |
| "DCF" | Density correction factor |
| Liquid Periodic Metering PV Item Tokens | |
| "BaseDensity" | Base density |
| "DensityPressure" | Density pressure |
| "DensityTemperature" | Density temperature |
| "Ethylene" | Ethylene |
| "EVP" | Equilibrium Vapor Pressure |
| "FlowRate" | Flow rate |
| "FlowTime" | Flow time |
| "MeterPressure" | Meter Pressure |
| "MeterTemperature" | Meter Temperature |
| "CoriolisDriveGain" | Coriolis drive gain |
| "ObservedDensity" | Observed density |
| "ObservedDensityInAPIDegrees" | Observed density - in API degrees |
| "ObservedDensityInRelativeDensity" | Observed density - in relative density |
| "Propylene" | Propylene |
|
"Pulses" "Pulses_Begin" "Pulses_End" |
Pulse count Pulse count at the beginning of the record Pulse count at the end of the record |
| "UncorrectedDensity" | Uncorrected density |
|
"IV" "IV_Begin" "IV_End" |
Indicated Volume Indicated Volume at the beginning of the record Indicated Volume at the end of the record |
|
"GV" "GV_Begin" "GV_End" |
Gross Volume Gross Volume at the beginning of the record Gross Volume at the end of the record |
|
"GSV" "GSV_Begin" "GSV_End" |
Gross Standard Volume Gross Standard Volume at the beginning of the record Gross Standard Volume at the end of the record |
|
"NSV" "NSV_Begin" "NSV_End" |
Net Standard Volume Net Standard Volume at the beginning of the record Net Standard Volume at the end of the record |
|
"Mass" "Mass_Begin" "Mass_End" |
Mass Mass at the beginning of the record Mass at the end of the record |
|
"SWPercent" |
Sediment and Water percentage |
|
"SWV" "SWV_Begin" "SWV_End" |
Sediment and Water volume Sediment and Water volume at the beginning of the record Sediment and Water volume at the end of the record |
| Custom Liquid Periodic Metering PV Item Tokens | |
|
"CustomPM1" |
Custom-defined PM process variable 1 See Remote Devices for your device type and EFM Data Items for more information. |
|
"CustomPM2" |
Custom-defined PM process variable 2 See Remote Devices for your device type and EFM Data Items for more information. |
|
"CustomPM3" |
Custom-defined PM process variable 3 See Remote Devices for your device type and EFM Data Items for more information. |
|
"CustomPM4" |
Custom-defined PM process variable 4 See Remote Devices for your device type and EFM Data Items for more information. |
|
"CustomPM5" |
Custom-defined PM process variable 5 See Remote Devices for your device type and EFM Data Items for more information. |
|
"CustomPM6" |
Custom-defined PM process variable 6 See Remote Devices for your device type and EFM Data Items for more information. |
|
"CustomPM7" |
Custom-defined PM process variable 7 See Remote Devices for your device type and EFM Data Items for more information. |
|
"CustomPM8" |
Custom-defined PM process variable 8 See Remote Devices for your device type and EFM Data Items for more information. |
|
"CustomPM9" |
Custom-defined PM process variable 9 See Remote Devices for your device type and EFM Data Items for more information. |
|
"CustomPM10" |
Custom-defined PM process variable 10 See Remote Devices for your device type and EFM Data Items for more information. |
| Configuration Item Tokens
Note: You can append _Begin or _End to any of the following configuration item tokens, in order to display the first or last value for the record. See Displaying Beginning or Ending Values for a Record for more information. |
|
|
"ConfigLogDateTime" |
Date/time of the configuration log |
|
"ConfigLogSource" |
Source of the configuration log See Configure Filter in the Using the Configuration Control topic for more information about configuration log source types. |
|
"AGA3ExpandedRange" |
See FMS Configuration Data Items for descriptions of these items. |
|
"AGA8ExpandedRange" See AGA 8 Data Ranges for more information. |
|
|
"AtmosphericPressure" |
|
|
"BaseCompressibilityOfAir" |
|
|
"BasePressure" |
|
|
"BaseTemperature" |
|
|
"CalibrationFactor" |
|
|
"ConeCoefficientThermalExpansion" |
|
|
"ConeDiameter" |
|
|
"ConeMaterial" |
|
|
"ConeRefTemp" |
|
|
"ContractHour" |
|
|
"CoriolisCalibrationPressure" |
|
|
"CoriolisPressureEffect" |
|
|
"DeviceDesc" |
|
|
"DeviceName" |
|
|
"DeviceType" |
|
|
"DischargeCoefficient" |
|
|
"DischargeCoefficientCalc" |
|
|
"DpAlarmHigh" |
|
|
"DpAlarmLow" |
|
|
"DpBackflowAlarm" |
|
|
"DpCalibrateHigh" |
|
|
"DpCalibrateLow" |
|
|
"DpTapsType" |
|
|
"DpTransducerRangeLow" |
|
|
"DpTransducerRangeHigh" |
|
|
"Elevation" |
|
|
"FixedTemp" |
|
|
"FlowRateAlarmHigh" |
|
|
"FlowRateAlarmLow" |
|
|
"FluidType" |
|
|
"FpvCalc" |
|
|
"GasExpansionFactorCalc" |
|
|
"HvCalc" |
|
|
"IntegralValueVariables" |
|
|
"IsentropicExponent" |
|
|
"KFactorMass" |
|
|
"KFactorVolume" |
|
|
"LinearCurveType" |
|
|
"LowFlowCutoffDp" |
|
|
"LowFlowCutoffFlowRate" |
|
|
"LowFlowCutoffMass" |
|
|
"LowFlowCutoffPulseInterval" |
|
|
"MeterFactor" |
|
|
"MeterTubeInsideDiameter" |
|
|
"MeterTubeMaterial" |
|
|
"MeterTubeRefTemp" |
|
|
"OrificeCoefficientThermalExpansion" |
|
|
"OrificePlateBoreSize" |
|
|
"OrificePlateMaterial" |
|
|
"OrificePlateRefTemp" |
|
|
"PipeCoefficientThermalExpansion" |
|
|
"PrimaryCalc" |
|
|
"SpAlarmHigh" |
|
|
"SpAlarmLow" |
|
|
"SpCalibrateHigh" |
|
|
"SpCalibrateLow" |
|
|
"SpTapLocation" |
|
|
"SpTransducerRangeHigh" |
|
|
"SpTransducerRangeLow" |
|
|
"SpType" |
|
|
"TempAlarmHigh" |
|
|
"TempAlarmLow" |
|
|
"TempCalibrateHigh" |
|
|
"TempCalibrateLow" |
|
|
"TempCalibrateZero" |
|
|
"TempTransducerRangeHigh" |
|
|
"TempTransducerRangeLow" |
|
|
"UseCoriolisPressureEffect" |
|
|
"UseLiveTemp" |
|
|
"WaterVaporCorrectionFactor" |
|
|
"WellStreamFactor" |
|
| Liquid-Specific Configuration Item Tokens | |
|
"Ethylene" |
See FMS Configuration Data Items for descriptions of these items. |
|
"Propylene" |
|
| "TotalizerDigits" | |
| Custom Configuration Item Tokens | |
|
"CustomConfig1" |
Custom-defined FMS Configuration Data Items See Remote Devices for your device type and FMS Configuration Data Items for more information. |
|
"CustomConfig2" |
|
|
"CustomConfig3" |
|
|
"CustomConfig4" |
|
|
"CustomConfig5" |
|
|
"CustomConfig6" |
|
|
"CustomConfig7" |
|
|
"CustomConfig8" |
|
|
"CustomConfig9" |
|
|
"CustomConfig10" |
|
| Gas Quality Item Tokens | |
|
"Methane" |
Methane (C1) |
|
"Ethane" |
Ethane (C2) |
|
"Propane" |
Propane (C3) |
|
"n-Butane" |
n-Butane (C4) |
|
"Isobutane" |
Isobutane (isoC4) |
|
"n-Pentane" |
n-Pentane (C5) |
|
"Isopentane" |
Isopentane (isoC5) |
|
"Neopentane" |
Neopentane (neoC5) |
|
"n-Hexane" |
n-Hexane (C6) |
|
"n-Heptane" |
n-Heptane (C7) |
|
"n-Octane" |
n-Octane (C8) |
|
"n-Nonane" |
n-Nonane (C9) |
|
"n-Decane" |
n-Decane (C10) |
|
"Argon" |
Argon (Ar) |
|
"CarbonDioxide" |
Carbon dioxide (CO2) |
|
"CarbonMonoxide" |
Carbon monoxide (CO) |
|
"Helium" |
Helium (He) |
|
"Hydrogen" |
Hydrogen (H2) |
|
"HydrogenSulfide" |
Hydrogen sulfide (H2S) |
|
"Nitrogen" |
Nitrogen (N2) |
|
"Oxygen" |
Oxygen (O2) |
|
"Water" |
Water (H2O) |
|
"Compressibility" |
Compressibility |
|
"DewPoint" |
Dew point |
|
"HeatingValueBasis" |
Heating value basis (Wet, Dry, or As delivered) |
|
"HeatingValueMass" |
Heating value mass |
|
"HeatingValueVolume" |
Heating value volume |
|
"RelativeDensity" |
Relative density |
|
"Viscosity" |
Viscosity |
| Custom Gas Quality Item Tokens | |
|
"CustomGQ1" |
Custom-defined GQ process variables See Remote Devices for your device type and EFM Data Items for more information. |
|
"CustomGQ2" |
|
|
"CustomGQ3" |
|
|
"CustomGQ4" |
|
|
"CustomGQ5" |
|
