Filter Attributes - Notification Attributes
The following filter attributes represents properties from the GNS Notification Message, Reference Tag, Facility Rule Filter.
Notification Current Values
| Attribute | Attribute Name | Description | User Values |
|---|---|---|---|
|
Alarm Level |
alarmlevel |
This attribute is used to filter on the alarm (sound) levels. |
1 - 4 |
|
Alarm Priority Category |
alarmprioritycategory |
This attribute is used to filter on the point's alarm priority category. |
None Low Medium High Critical |
|
Alarm Priority Category Bit 1-3 Set |
alarmprioritycategory1 alarmprioritycategory2 alarmprioritycategory3 |
These attributes are used to filter on whether the Alarm Priority Category Bits 1-3 are set. |
Yes or No |
|
Alternate Units |
alternateunits |
This attribute is used to filter on the point’s alternate units. |
Alphanumeric |
|
Alternate Value |
alternatevalue |
This attribute is used to filter on the point’s alternate value. |
Alphanumeric |
|
Config Bit 1-15 Set |
configbit1 - configbit15 |
These attributes are used to filter on whether the Configurable Bits 1-15 are set. |
Yes or No |
|
External Value state set |
externalvalue |
This attribute is used to filter on whether the point's External Value state is set. |
Yes or No |
|
Inited state set |
initedflag |
This attribute is used to filter on whether the point's Inited state is set. |
Yes or No |
|
Is Alarm Suppressed |
alarmsuppressed |
This attribute is used to filter on whether the alarm is suppressed. |
Yes or No |
|
Notification Configurable Bit Calc Parm 1 |
cfgbitactivecalcparm1 |
This attribute is used to filter on the alarm to which the notification maps. Notification Configurable Bit Calc Parm 1 is relative to the Configurable Bit that is causing the alarm to occur. |
Alphanumeric |
|
Notification Configurable Bit Calc Parm 1 Description |
cfgbitactivecalcparm1desc |
This attribute is used to filter on the description for Notification Configurable Bit Calc Parm 1. |
Alphanumeric |
|
Notification Configurable Bit Calc Parm 2 |
cfgbitactivecalcparm2 |
This attribute is used to filter on the alarm to which the notification maps. Notification Configurable Bit Calc Parm 2 is relative to the Configurable Bit that is causing the alarm to occur. |
Alphanumeric |
|
Notification Configurable Bit Calc Parm 2 Description |
cfgbitactivecalcparm2desc |
This attribute is used to filter on the description for Notification Configurable Bit Calc Parm 2. |
Alphanumeric |
|
Notification Configurable Bit Enabled |
cfgbitactiveenabled |
This attribute is used to filter on whether the Notification Configurable Bit is enabled. |
Yes or No |
|
Notification Configurable Bit GNS ID |
cfgbitactivegnsid |
This attribute is used to filter whether Notification Configurable Bit GNS ID is set. |
Yes or No |
|
Notification Configurable Bit Name |
cfgbitactivename |
This attribute is used to filter on the name of the Configurable Bit that initiated the notification. |
Yes or No |
|
Notification Configurable Bit Report CAS |
cfgbitactivereportcas |
This attribute is used to filter whether the Report CAS Notification Configurable Bit is set. |
Yes or No |
|
Notification Configurable Bit Report GNS |
cfgbitactivereportgns |
This attribute is used to filter whether the Report GNS Notification Configurable Bit is set. |
Yes or No |
|
Notification Configurable Bit Reporting Delay |
cfgbitactiverptdelay |
This attribute is used to filter whether the Reporting Delay Notification Configurable Bit is set. |
Yes or No |
|
Point Digital or Analog bit set |
digitalanalog |
This attribute is used to filter whether the DIGITAL_ANALOG Bit is set. |
Yes or No |
|
Point String or Enum bit set |
stringenum |
This attribute is used to filter whether the STRING_ENUM Bit is set. |
Yes or No |
|
Point type is Input |
in_out |
This attribute is used to filter whether the point type is an input point type. |
Yes or No |
|
Primary Units |
primaryunits |
This attribute is used to filter on the point’s primary units. |
Alphanumeric |
|
Primary Value |
primaryvalue |
This attribute is used to filter on the point’s primary value. |
Alphanumeric |
|
Scheme Bit 1-4 Set |
scheme1 - scheme4 |
This attribute is used to filter whether Scheme Bit 1-4 is set. |
Yes or No |
|
Time |
time |
||
|
Unreliable Value |
unreliableflag |
This attribute is used to filter on whether the point's Unreliable bit is set. |
Yes or No |
|
Updated State Set |
updatedflag |
This attribute is used to filter on whether the point's Updated bit is set. |
Yes or No |
|
User Bit 1-16 Set |
userbit1 - userbit16 |
These attributes are used to filter on whether the User Bits 1-15 are set. |
Yes or No |
|
Value |
value |
This attribute is used to filter on the point’s value. |
Alphanumeric |
Notification Timeout
| Attribute | Attribute Name | Description | User Values |
|---|---|---|---|
|
Expiration time |
timeouttime |
This attribute is used to filter on the notification's expiration time. |
Alphanumeric |
|
Time in seconds remaining |
timeoutremain |
This attribute is used to filter on the notification's remaining time in seconds before timeout. |
Numeric |
