eProdRPC EIE
The eProdRPC EIE supports interoperation with several common rod pump control (RPC) field devices that use the (Baker) 8500 protocol, most notably those now offered by Weatherford.
The eProdRPC EIE supports the ability to view surface and downhole dynagraph cards from the remote device editor or by means of the CygNet Dynagraph Viewer client application. In addition to graphing pump cycle data, this functionality enables you to set a pump-off setpoint that protects machinery while optimizing recovery.
Another useful feature of the eProdRPC EIE is the "Command Message (Configurable)" data group. This is an ordinalizable data group that provides a means to add command messages for a number of Command Action (CA) parameters. While instances of this data group may be added on an ad hoc basis from the remote device editor, they can also be added at the device template file level for simultaneous implementation in numerous field devices.
Specifications
The following table lists and describes EIE specifications.
|
Manufacturer |
Weatherford International Ltd. |
|
Protocol(s) |
8500 |
|
Model(s) * |
eProductions 8500, Weatherford 8500 eProductions 8750, Weatherford 8750 eProductions 8800, Weatherford 8800 WellPilot RPOC Weatherford Model 2000 RPC Weatherford ePIC RPC Weatherford EXS-1000 Weatherford Model 2000 RPC |
|
Required Files |
CxDdsEProdRpcEditors.dll UisEProdRpcDeviceDriver.dll or UisEProdRpcDeviceDriver64.dll |
|
Sample Templates |
EProdRpc_8500.dtf EProdRpc_8800.dtf EProdRpc_8800v204Legacy.dtf EProdRpc_WellPilotRPOC.dtf |
|
EProdRpc |
|
|
Cryout Support |
No |
|
FMS Support |
No |
|
Listen Mode |
No |
|
64-bit Support |
Yes. See 64-bit Device Drivers. |
*The Weatherford models listed here were formerly Baker and/or eProdRPC field devices.
For more information, see sample device template files and manufacturer documentation.
More:
UIS Command Component Parameters
