The SetPoint button can be used to change the current value for the point associated with the button.

• Click the button to open a small dialog box where you can enter a new value

• Type a new value in the Value field

• Click OK to set the value and dismiss the dialog box

• Click Cancel to abort the setpoint operation

• Click Apply to set the value without closing the dialog box.

When the new value is set (OK or Apply), a green check will indicate a successful setpoint command or a red error icon will indicate a failure to set the value.

SetPoint button run mode dialog box

Acknowledge the alarm from the context menu:

• Select the object when it is displaying an alarm color or blink action. Some controls can be configured to blink to indicate that the object's point has an unacknowledged alarm.
• Right-click the object and select Acknowledge alarm from the context menu. The Acknowledge alarm option is removed once the alarm is acknowledged.

See the control properties for more information about configuring alarm acknowledgment options.

Canvas Native view
Context Menu

• Select the object.
• Right-click and select any of the following options from the context menu:
  • Current value — Open the Point Properties dialog box
  • Acknowledge alarm — Acknowledge an unacknowledged alarm
  • History
    • History values — Open the History Values dialog box
    • Alarm history — Open the Alarm History dialog box
  • Point configuration
    • Comments — Open the Comments tab of the PNT Editor
    • Alarm settings — Open the Alarm Settings dialog box for the point type
    • All settings — Open the PNT Editor
    • Questionable state — Open the Edit Questionable State dialog box
    • Alarm suppression — Open the Alarm Suppression Settings dialog box
  • Facility configuration — Open the Properties for <Facility> dialog box
  • Add to chart — Add point values to a default chart (described below)

Grid cell context menu
Point configuration

• Select the object, right-click and select Add to chart from the context menu, then select:
  • New chart — Add values to a new default chart
  • New chart with rollups — Add rolled-up values to a new chart. Four labelled rollup series will be added to the default chart:
    • Real Time — No rollup
    • Min — Calculated minimum
    • Max — Calculate maximum
    • Mean — Calculated mean
  • Chart n — Add values to a previously opened default chart
• The point values for the time range specified for the screen will be displayed as a series in the default chart
• You can add as many default charts as you want
• You can add a series from different controls to same default chart, or from the same control to different default charts
• See Default Chart for more information about the default chart feature
• See Using a Chart in Run Mode for more information about hiding and removing series from a default chart
• See Viewing Data in a TWC Ad Hoc Chart for information about adding a CygNet point presented in the web view to an on-demand or ad hoc chart.

Grid cell context menu
Add data to default chart

The CygNet Thin Web Client supports its own context menu visible in the web view.

Perform the following actions from the TWC context menu:

• Right-click on a control to view the context menu for a selected point. When the context menu is active the main part of the page is dimmed. The context menu is divided into four sections:
1. Acknowledge Alarm — If the point is in alarm, the Acknowledge Alarm icon will indicate this state. Click to acknowledge it and the Acknowledge Alarm will disappear.
2. Current Value — View read-only Current Value attributes for the selected point.
3. Alarm Summary — Click the toggle switch to view Alarm Summary values.

   From here you can edit alarm threshold values or the alarm priority in the context menu, which will be written back to the point on the CygNet host server. A warning will show if you do not have the appropriate security access level to edit points.

   1. Click (Edit) then click on the Value or Priority you want to edit.
   2. Enter a new value or use the spin control to increase or decrease the value.
   3. Click (Save) to write the new value back to the point configuration on the CygNet host server.
   4. Or click (Cancel) to abort and return to the read-only mode.
4. Chart — Click the toggle switch to view a quick Chart for a selected point. The series shows the last eight hours of value history and will update with each new point value received. Hover over any point in the series to reveal a small popup showing the UDC, point value, and timestamp. From here you can add the currently viewed point to a new or existing ad hoc chart which will display in a new browser tab. Note that an ad hoc chart is not a template. Any saved chart is hard-coded with specific point tags.
   1. Click Add to new chart to add the selected point to a new ad hoc chart. A new chart titled NewChart<n> will open in a new browser tab, where you can rename, duplicate, or delete the chart. You can also view the chart data in a grid and export data to an Excel file.
   2. Click Existing chart(s) to open a drop-down list of previously saved ad hoc charts.
   3. Click the + <chart name> to add the selected point to that chart. The selected chart will open in a new browser tab.  Note: If you add a point to an existing chart that is already opened in another tab, then the point is added to that open chart but TWC does not shift focus to that tab. You will remain on the current tab.
   4. Click Existing chart(s) again to close the drop-down list of existing charts.

   Once saved an ad hoc chart can be viewed from the main CygNet TWC web view via the (Saved Charts ) button. See Viewing Data in a TWC Ad Hoc Chart for more information about working with ad hoc charts.

• Click (Close) to close the context menu and return to the TWC page that launched the menu.

See Using the Thin Web Client Context Menu for more information.